Repair of Bansuri

in Bansuri, Repair & DIY

Even after so much of care, a flute might get develop a crack. Following are of the easy ways by which you can repair your flute:

  • Take a cold bansuri (not played recently) and apply an instant glue with low viscosity where there is a crack.

  • Let the glue flow into the crack.

  • Hold the glue tight enough for around 30-45 second so that  crack is closed.

  • Leave flute for about 5 minutes.

  • Wipe off the extra glue.

  • Bind the surface either using a thread or 4-5 rounds of scotch tape.

  • If nothing works, then it needs to be replaced.

Comments on this entry are closed.

Previous post:

Next post: